列挙体定義書 - 《no identifier》

enum

No.	名称	属性	説明
1	《no identifier》
	BMU_IDLE	1<<31	BMU Idle State
	BMU_RX_TCP_PKT	1<<30	Rx TCP Packet (when RSS Hash enabled)
	BMU_RX_IP_PKT	1<<29	Rx IP Packet (when RSS Hash enabled)
	BMU_ENA_RX_RSS_HASH	1<<15	Enable Rx RSS Hash
	BMU_DIS_RX_RSS_HASH	1<<14	Disable Rx RSS Hash
	BMU_ENA_RX_CHKSUM	1<<13	Enable Rx TCP/IP Checksum Check
	BMU_DIS_RX_CHKSUM	1<<12	Disable Rx TCP/IP Checksum Check
	BMU_CLR_IRQ_PAR	1<<11	Clear IRQ on Parity errors (Rx)
	BMU_CLR_IRQ_TCP	1<<11	Clear IRQ on TCP segment. error (Tx)
	BMU_CLR_IRQ_CHK	1<<10	Clear IRQ Check
	BMU_STOP	1<<9	Stop Rx/Tx Queue
	BMU_START	1<<8	Start Rx/Tx Queue
	BMU_FIFO_OP_ON	1<<7	FIFO Operational On
	BMU_FIFO_OP_OFF	1<<6	FIFO Operational Off
	BMU_FIFO_ENA	1<<5	Enable FIFO
	BMU_FIFO_RST	1<<4	Reset FIFO
	BMU_OP_ON	1<<3	BMU Operational On
	BMU_OP_OFF	1<<2	BMU Operational Off
	BMU_RST_CLR	1<<1	Clear BMU Reset (Enable)
	BMU_RST_SET	1<<0	Set BMU Reset
	BMU_CLR_RESET	BMU_FIFO_RST \| BMU_OP_OFF \| BMU_RST_CLR
	BMU_OPER_INIT	BMU_CLR_IRQ_PAR \| BMU_CLR_IRQ_CHK \| BMU_START \| BMU_FIFO_ENA \| BMU_OP_ON
	BMU_WM_DEFAULT	0x600
	BMU_WM_PEX	0x80

《no identifier》